Month: February 2023

Bioconversion of inulin to difructose anhydride III by a novel inulin fructotransferase from Arthrobacter chlorophenolicus A6 was written by Zhu, Yingying;Wang, Xiao;Yu, Shuhuai;Zhang, Wenli;Zhang, Tao;Jiang, Bo;Mu, Wanmeng. And the article was included in Process Biochemistry (Oxford, United Kingdom) in 2018.Category: tetrahydrofurans This article mentions the following:

The gene encoding difructose anhydride III (DFA III)-forming inulin fructotransferase (IFTase) from Arthrobacter chlorophenolicus A6 was cloned and overexpressed in Escherichia.coli. The recombinant IFTase (DFA III-forming) was purified using one-step nickel affinity chromatog. Based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gel filtration analyses, the enzyme showed a homotrimeric form composed of three identical subunits, each with an apparent mol. mass of 43 kDa. The maximum catalytic activity was shown at 65°C and pH 5.5, and the specific activity was measured as 902 U mg^-1. The enzyme showed remarkable thermostability and over half of the initial activity was retained after incubation at 80°C for 1 h. The K_m and V_max were estimated to 12.93 mM and 2.89μmol min^-1 ml^-1, resp. After complete hydrolysis of inulin for DFA III production by the purified enzyme, the produced minor products contained sucrose (GF), 1-kestose (GF₂), and nystose (GF₃). The smallest substrate was identified to be GF₃. When 50, 100, and 200 g l^-1 of inulin were hydrolyzed by the purified IFTase, the DFA III yield reached 81%, 72%, and 67%, resp. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Category: tetrahydrofurans).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofurans and furans are important oxygen-containing heterocycles that often exhibit interesting properties for biological applications or applications in the cosmetic industry. Tetrahydrofuran reaction with hydrogen sulfide: In the presence of a solid acid catalyst, tetrahydrofuran reacts with hydrogen sulfide to give tetrahydrothiophene.Category: tetrahydrofurans

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Predictive Endocrine Testing in the 21st Century Using in Vitro Assays of Estrogen Receptor Signaling Responses was written by Rotroff, Daniel M.;Martin, Matt T.;Dix, David J.;Filer, Dayne L.;Houck, Keith A.;Knudsen, Thomas B.;Sipes, Nisha S.;Reif, David M.;Xia, Menghang;Huang, Ruili;Judson, Richard S.. And the article was included in Environmental Science & Technology in 2014.Category: tetrahydrofurans This article mentions the following:

Thousands of environmental chems. are subject to regulatory review for their potential to be endocrine disruptors (ED). In vitro high-throughput screening (HTS) assays have emerged as a potential tool for prioritizing chems. for ED-related whole-animal tests. In this study, 1814 chems. including pesticide active and inert ingredients, industrial chems., food additives, and pharmaceuticals were evaluated in a panel of 13 in vitro HTS assays. The panel of in vitro assays interrogated multiple end points related to estrogen receptor (ER) signaling, namely binding, agonist, antagonist, and cell growth responses. The results from the in vitro assays were used to create an ER Interaction Score. For 36 reference chems., an ER Interaction Score >0 showed 100% sensitivity and 87.5% specificity for classifying potential ER activity. The magnitude of the ER Interaction Score was significantly related to the potency classification of the reference chems. ERα/ERβ selectivity was also evaluated, but relatively few chems. showed significant selectivity for a specific isoform. When applied to a broader set of chems. with in vivo uterotrophic data, the ER Interaction Scores showed 91% sensitivity and 65% specificity. Overall, this study provides a novel method for combining in vitro concentration response data from multiple assays and, when applied to a large set of ER data, accurately predicted estrogenic responses and demonstrated its utility for chem. prioritization. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7Category: tetrahydrofurans).

(2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7) belongs to tetrahydrofuran derivatives. Tetrahydrofuran and dihydrofuran form the basic structural unit of many naturally occurring scaffolds like gambieric acid A and ciguatoxin, goniocin, and some biologically active molecules. THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.Category: tetrahydrofurans

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

A γ-glutamylcysteine ligase AcGCL alleviates cadmium-inhibited fructooligosaccharides metabolism by modulating glutathione level in Allium cepa L. was written by Luo, Wei;Long, Yuming;Feng, Zili;Li, Rui;Huang, Xiaojia;Zhong, Jiaxin;Liu, Dongyun;Zhao, Hongbo. And the article was included in Journal of Hazardous Materials in 2021.Formula: C18H32O16 This article mentions the following:

Fructooligosaccharides (FOS) are important carbohydrates in plants. Cadmium (Cd) toxicity limits growth and development in several plant species. Whether FOS metabolism is affected by Cd and the mol. mechanisms of tolerance of the effects of Cd toxicity in plants remain enigmatic. In the present study, FOS metabolism was analyzed under Cd stress in onion (Allium cepa L.). Results showed that Cd stress can inhibit FOS accumulation in onion, followed by the upregulation of a putative onion γ-glutamylcysteine ligase gene AcGCL. Heterologous expression of the AcGCL protein in Escherichia coli revealed that this recombinant enzyme has GCL activity. Furthermore, overexpressing AcGCL significantly increased glutathione (GSH) accumulation in young onion roots under Cd treatment, accompanied by increased phytochelatin (PC) amount, and increased transcript expression of GSH synthetase (GS), and phytochelatin synthase (PCS) genes. Notably, compared with control, overexpressing AcGCL ameliorated Cd phytotoxicity on onion FOS metabolism, which correlated with increased FOS synthesis. Taken together, these results suggest that the function of AcGCL as a γ-glutamylcysteine ligase can alleviate Cd inhibited FOS metabolism by modulating GSH levels in onion. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Formula: C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF), or oxolane, is mainly used as a precursor to polymers. Being polar and having a wide liquid range, THF is a versatile solvent. THF (Tetrahydrofuran) is also used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc.Formula: C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Dicaffeoyl polyamine derivatives from bitter goji: Contribution to the bitter taste of fruit was written by Qian, Dan;Chen, Jinlong;Lai, Changjiangsheng;Kang, Liping;Xiao, Sa;Song, Jianfang;Xie, Junbo;Huang, Luqi. And the article was included in Fitoterapia in 2020.Product Details of 126-14-7 This article mentions the following:

Although the bioactive compounds in goji have been thoroughly identified and quantified, little information is available on the bitter compounds in the berries, and no systematic works on the substances responsible for their bitterness have been performed. Herein, the substances contributing to the bitterness of berries were isolated and purified from bitter-tasting goji by the combined use of column chromatog. and high-pressure liquid chromatog. (HPLC). The bitterness of the isolated compounds was evaluated using a biosensor with immobilized rat taste-bud tissues. The structures were elucidated via comprehensive mass spectrometry (MS) and NMR (NMR) analyses. Seven spermine or spermidine alkaloids were identified, including four new compounds (lyciamarspermidines A and B and lyciamarspermines A and B). The intensities of the bitterness levels of the isolated compounds differed with the number of glucose substituents. These isolated compounds all contribute to the bitterness of goji. The results of this study provide opportunities for the further investigation of the bitterness of goji. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7Product Details of 126-14-7).

(2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7) belongs to tetrahydrofuran derivatives.Tetrahydrofuran has many industry uses as a solvent including in natural and synthetic resins, high polymers, fat oils, rubber, polymer. Tetrahydrofuran reaction with hydrogen sulfide: In the presence of a solid acid catalyst, tetrahydrofuran reacts with hydrogen sulfide to give tetrahydrothiophene.Product Details of 126-14-7

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Preparation of SO₄^2-/ZrO₂-Al₂O₃ solid superacid by improving preparation condition and adding lanthanum was written by Chen, Tongyun;Gu, Xupeng;Wan, Yubao. And the article was included in Huaxue Wuli Xuebao in 2002.Application In Synthesis of (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate This article mentions the following:

Various superacid SO₄^2-/ZrO₂-Al₂O₃ catalysts were prepared by a coprecipitation, and modified by aging at low temperature and addition of the rare earth oxide, such as La₂O₃. A optimum at. ratio of Zr/Al was found to be 0.5, which was confirmed by the catalytic activity of samples for n-butane isomerization. IR measurements demonstrated that the intensity of the peak at 1393 cm^-1 for the samples aged at low temperature and containing the rare earth oxide was more higher than that for the samples at room temperature For the sample containing the RE oxide and aged at low temperature, XRD observed a metastable tetragonal phase of ZrO₂ crystal which is responsible for the higher catalysis activity as we believe. The observation of catalytic activity for esterification of sucrose further evidenced the conclusion mentioned above. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7Application In Synthesis of (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate).

(2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate (cas: 126-14-7) belongs to tetrahydrofuran derivatives.Tetrahydrofuran has many industry uses as a solvent including in natural and synthetic resins, high polymers, fat oils, rubber, polymer. THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.Application In Synthesis of (2R,3R,4S,5R,6R)-2-(Acetoxymethyl)-6-(((2S,3S,4R,5R)-3,4-diacetoxy-2,5-bis(acetoxymethyl)tetrahydrofuran-2-yl)oxy)tetrahydro-2H-pyran-3,4,5-triyl triacetate

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

New glyco-copolymers containing α-D-glucofuranose and α-D-mannofuranose groups synthesized by free-radical polymerization of sugar-based monomers was written by Namazi, Hassan;Pooresmaeil, Malihe;Oskooie, Maryam Nasiri. And the article was included in Polymer Bulletin (Heidelberg, Germany) in 2022.Reference of 582-52-5 This article mentions the following:

Carbohydrates are safe materials with the potential of application in various areas, hence, in recent years, a growing interest has been attracted to the synthesis of the new systems containing carbohydrates. By considering this and based on the carbohydrates merits, in this work, the new two different random glyco-copolymers were prepared through the polymerization of the α-D-glucofuranose- and α-D-mannofuranose-based monomers. A facile free-radical polymerization technique was utilized for glyco-copolymers synthesis in the presence of benzoyl peroxide (BPO) as an initiator. Fourier transform IR (FT-IR) technique was used for investigating the achievements in the synthesis of copolymers. In the proton NMR (¹H NMR) spectroscopy anal., the absence of any peaks in the rigon related to vinylic protons confirmed the successful synthesizing of glyco-copolymers. As well as, enhancing the intensity of the peaks in the 0.60-2.39 ppm which is related to the formed aliphatic protons as a result of vinylic glycomonomers copolymerization is the strong witness for success in copolymerization In this way and by considering the special structure of the prepared glyco-copolymers and based on the review of the published literature, it is expected that the prepared new glyco-copolymers be a good candidate for biomedicinal applications. In the experiment, the researchers used many compounds, for example, (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5Reference of 582-52-5).

(3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5) belongs to tetrahydrofuran derivatives. THF (Tetrahydrofuran) is water-miscible and has a low viscosity making it a highly versatile solvent used in a variety of industries. Commercial tetrahydrofuran contains substantial water that must be removed for sensitive operations, e.g. those involving organometallic compounds. Although tetrahydrofuran is traditionally dried by distillation from an aggressive desiccant, molecular sieves are superior.Reference of 582-52-5

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Role of root exudates on assimilation of phosphorus in young and old Arabidopsis thaliana plants was written by Pantigoso, Hugo A.;Yuan, Jun;He, Yanhui;Guo, Qinggang;Vollmer, Charlie;Vivanco, Jorge M.. And the article was included in PLoS One in 2020.Electric Literature of C18H32O16 This article mentions the following:

The role of root exudates has long been recognized for its potential to improve nutrient use efficiency in cropping systems. However, studies addressing the variability of root exudates involved in phosphorus solubilization across plant developmental stages remain scarce. Here, we grew Arabidopsis thaliana seedlings in sterile liquid culture with a low, medium, or high concentration of phosphate and measured the composition of the root exudate at seedling, vegetative, and bolting stages. The exudates changed in response to the incremental addition of phosphorus, starting from the vegetative stage. Specific metabolites decreased in relation to phosphate concentration supplementation at specific stages of development. Some of those metabolites were tested for their phosphate solubilizing activity, and 3-hydroxypropionic acid, malic acid, and nicotinic acid were able to solubilize calcium phosphate from both solid and liquid media. In summary, our data suggest that plants can release distinct compounds to deal with phosphorus deficiency needs influenced by the phosphorus nutritional status at varying developmental stages. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Electric Literature of C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF) is a Lewis base that bonds to a variety of Lewis acids such as I2, phenols, triethylaluminum and bis(hexafluoroacetylacetonato)copper(II). Tetrahydrofuran can also be produced, or synthesised, via catalytic hydrogenation of furan. This process involves converting certain sugars into THF by digesting to furfural. An alternative to this method is the catalytic hydrogenation of furan with a nickel catalyst.Electric Literature of C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Diversity-Oriented Synthesis of Aliphatic Fluorides via Reductive C(sp³)-C(sp³) Cross-Coupling Fluoroalkylation was written by Sheng, Jie;Ni, Hui-Qi;Ni, Shan-Xiu;He, Yan;Cui, Ru;Liao, Guang-Xu;Bian, Kang-Jie;Wu, Bing-Bing;Wang, Xi-Sheng. And the article was included in Angewandte Chemie, International Edition in 2021.Recommanded Product: 582-52-5 This article mentions the following:

A direct nickel-catalyzed monofluoromethylation of unactivated alkyl halides e.g., (3-bromopropyl)benzene using a low-cost industrial raw material, bromofluoromethane, by demonstrating a general and efficient reductive cross-coupling of two alkyl halides e.g., (3-bromopropyl)benzene and e.g., (2-bromo-2-fluoroethyl)benzene was described. Results with 1-bromo-1-fluoroalkane also demonstrate the viability of monofluoroalkylation, which further established the first example of reductive C(sp³)-C(sp³) cross-coupling fluoroalkylation. These transformations demonstrate high efficiency, mild conditions, and excellent functional-group compatibility, especially for a range of pharmaceuticals and biol. active compounds Mechanistic studies support a radical pathway. Kinetic studies reveal that the reaction is first-order dependent on catalyst and alkyl bromide whereas the generation of monofluoroalkyl radical is not involved in the rate-determining step. This strategy provides a general and efficient method for the synthesis of aliphatic fluorides e.g, (4-fluorobutyl)benzene. In the experiment, the researchers used many compounds, for example, (3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5Recommanded Product: 582-52-5).

(3aR,5S,6S,6aR)-5-((R)-2,2-Dimethyl-1,3-dioxolan-4-yl)-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-6-ol (cas: 582-52-5) belongs to tetrahydrofuran derivatives. Tetrahydrofuran (THF) is a Lewis base that bonds to a variety of Lewis acids such as I2, phenols, triethylaluminum and bis(hexafluoroacetylacetonato)copper(II). THF (Tetrahydrofuran) is also used as a starting material for the synthesis of poly(tetramethylene ether) glycol (PTMG), etc.Recommanded Product: 582-52-5

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

Fructooligosaccharides production by Schedonorus arundinaceus sucrose:sucrose 1-fructosyltransferase constitutively expressed to high levels in Pichia pastoris was written by Hernandez, Lazaro;Menendez, Carmen;Perez, Enrique R.;Martinez, Duniesky;Alfonso, Dubiel;Trujillo, Luis E.;Ramirez, Ricardo;Sobrino, Alina;Mazola, Yuliet;Musacchio, Alexis;Pimentel, Eulogio. And the article was included in Journal of Biotechnology in 2018.COA of Formula: C18H32O16 This article mentions the following:

The non-saccharolytic yeast Pichia pastoris was engineered to express constitutively the mature region of sucrose:sucrose 1-fructosyltransferase (1-SST, EC 2.4.1.99) from Tall fescue (Schedonorus arundinaceus). The increase of the transgene dosage from one to nine copies enhanced 7.9-fold the recombinant enzyme (Sa1-SSTrec) yield without causing cell toxicity. Secretion driven by the Saccharomyces cerevisiae α-factor signal peptide resulted in periplasmic retention (38%) and extracellular release (62%) of Sa1-SSTrec to an overall activity of 102.1 U/mL when biomass reached (106 g/l, dry weight) in fed-batch fermentation using cane sugar for cell growth. The volumetric productivity of the nine-copy clone PGFT6x-308 at the end of fermentation (72 h) was 1422.2 U/l/h. Sa1-SSTrec purified from the culture supernatant was a monomeric glycoprotein optimally active at pH 5.0-6.0 and 45-50. The removal of N-linked oligosaccharides by Endo Hf treatment decreased the enzyme stability but had no effect on the substrate and product specificities. Sa1-SSTrec converted sucrose (600 g/l) into 1-kestose (GF₂) and nystose (GF₃) in a ratio 9:1 with their sum representing 55-60% (weight/weight) of the total carbohydrates in the reaction mixture Variations in the sucrose (100-800 g/l) or enzyme (1.5-15 units per g of substrate) concentrations kept unaltered the product profile. Sa1-SSTrec is an attractive candidate enzyme for the industrial production of short-chain fructooligosaccharides, most particularly 1-kestose. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9COA of Formula: C18H32O16).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives.Tetrahydrofuran has many industry uses as a solvent including in natural and synthetic resins, high polymers, fat oils, rubber, polymer. THF can also be synthesized by catalytic hydrogenation of furan. This allows certain sugars to be converted to THF via acid-catalyzed digestion to furfural and decarbonylation to furan, although this method is not widely practiced. THF is thus derivable from renewable resources.COA of Formula: C18H32O16

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem

LC-MS/MS method validation for the quantitation of 1-kestose in wheat flour was written by Fruehwirth, Sarah;Call, Lisa;Maier, Fabiola Abigail;Hebenstreit, Vanessa;D′Amico, Stefano;Pignitter, Marc. And the article was included in Journal of Food Composition and Analysis in 2021.Application In Synthesis of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol This article mentions the following:

Fructan anal. is challenging due to several mono-, di-, and oligosaccharides as well as starch and proteins present in wheat grains which interfere with the anal. So far, a sensitive and fully validated LC-MS/MS method is missing although even small amounts of short-chain fructans such as 1-kestose are suggested to elicit gastrointestinal symptoms in patients suffering from irritable bowel syndrome. Therefore, the aim of this study was to validate a LC-MS/MS method for the detection of 1-kestose in a complex wheat matrix according to international guidelines. The chromatog. separation was performed on a C18 column coupled with a triple quadrupole MS in MRM mode using the transition m/z 503 → m/z 119 for the quantitation of 1kestose. Accuracy of 1-kestose quantitation in an aqueous solution was 105.5%. However, the poor recovery of 64.1% in a complex wheat matrix demonstrated the great impact of proteins and other constituents present in wheat. Nevertheless, the proposed method allows precise quantification of 1-kestose amounts ≥0.1 ppm. The robustness of the method was confirmed by the results being within 6.03% of the target value. The validated method was successfully applied for the measurement of 10 different wheat samples with 1-kestose amounts between 7.0 and 50.2 ppm. In the experiment, the researchers used many compounds, for example, (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9Application In Synthesis of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol).

(2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol (cas: 470-69-9) belongs to tetrahydrofuran derivatives. Tetrahydrofurans and furans are important oxygen-containing heterocycles that often exhibit interesting properties for biological applications or applications in the cosmetic industry. It is more basic than diethyl ether and forms stronger complexes with Li+, Mg2+, and boranes. It is a popular solvent for hydroboration reactions and for organometallic compounds such as organolithium and Grignard reagents.Application In Synthesis of (2R,3R,4S,5S,6R)-2-(((2S,3S,4S,5R)-2-((((2R,3S,4S,5R)-3,4-Dihydroxy-2,5-bis(hydroxymethyl)tetrahydrofuran-2-yl)oxy)methyl)-3,4-dihydroxy-5-(hydroxymethyl)tetrahydrofuran-2-yl)oxy)-6-(hydroxymethyl)tetrahydro-2H-pyran-3,4,5-triol

Referemce:
Tetrahydrofuran – Wikipedia,
Tetrahydrofuran | (CH2)3CH2O – PubChem